게시판 최근논문

[하이라이트 논문] 한국광학회지 Vol. 33 No.6 (2022 December)

사무국 hit 937 date 2022-12-26

기하 위상 렌즈 기반의 색공초점 센서를 이용한 투명 물질 두께 측정 연구
Using a Chromatic Confocal Sensor Based on a Geometric Phase Lens

송민관ㆍ박효미ㆍ주기남

 

한국광학회지  Vol. 33 No.6 (2022 December) pp. 317-323
DOI: https://doi.org/10.3807/KJOP.2022.33.6.317

 


 

 Optical configuration of the chromatic confocal sensor using a geometric phase lens. OC, optical circulator; CL, collimating lens; GPL, geometric phase lens; QWP, quarter-wave plate; S, specimen; LHP, left-handed circular polarization; RHP, right-handed circular polarization.

Fig. 1  Optical configuration of the chromatic confocal sensor using a geometric phase lens. OC, optical circulator; CL, collimating lens; GPL, geometric phase lens; QWP, quarter-wave plate; S, specimen; LHP, left-handed circular polarization; RHP, right-handed circular polarization.
 

Keywords: 색공초점 센서, 기하 위상 렌즈, 두께 측정
OCIS codes: (120.3930) Metrological instrumentation; (180.1790) Confocal microscopy

 


 

초록
본 논문에서는 투명한 물질의 두께를 측정하기 위한 방법으로 기하 위상 렌즈 기반의 색공초점 센서를 개발하고, 성능 개선을 위한 보정 방법을 제시한다. 일반적인 색공초점 센서의 복잡한 설계로 인한 한계를 극복하기 위해, 기하 위상 렌즈를 이용하여 전체 시스템의 크기를 줄이고, 시스템 오차를 보상하기 위한 파장 첨두 위치 추출 방법과 계통 오차 제거 방법을 설명한다. 색공초점 센서를 이용하여 투명한 물질의 두께를 측정하기 위한 이론을 설명하고, 이를 사파이어 및 BK7 물질의 두께를 측정함으로써 실험적으로 검증한다. 색공초점 센서를 이용한 두께 측정 방법은 기존의 간섭계 및 공초점 센서의 방법들에 비해 측정 속도가 빠르고, 분산 등에 의한 두께 측정 영역 제한이 없기 때문에 많은 응용이 가능하다.

Abstract
In this investigation, we describe a chromatic confocal sensor based on a geometric phase lens for measuring the thicknesses of transparent plates. In order to design a compact sensor, a geometric phase lens, which has diffractive and polarizing characteristics, is used as a device to generate chromatic aberration, and a fiber optic module is adopted. The systematic error of the sensor is reduced with wavelength peak detection by Gaussian curve fitting and the common error compensation obtained by the repeatedly consecutive experimental results. An approach to calculate the plate thickness is derived and verified with sapphire and BK7 plates. Because of the simple and compact design of the proposed sensor with rapid measurement capability, it is expected to be widely used in thickness measurements of transparent plates as an alternative to traditional approaches.